Spades

AECO ASP-1931G Gold-Plated Tellurium Copper Spade Connectors One piece Y Spade were made by stamping process. The Y spade interface with wave design that it with elasticity when the using within binding post. Spade plug was half cross cutting shape and...

AECO ASP-1931R Rhodium-Plated Tellurium Copper Spade Connectors One piece Y Spade were made by stamping process. The Y spade interface with wave design that it with elasticity when the using within binding post. Spade plug was half cross cutting shape...

AECO ASP-1931S Silver-Plated Tellurium Copper Spade Connectors One piece Y Spade were made by stamping process. The Y spade interface with wave design that it with elasticity when the using within binding post. Spade plug was half cross cutting shape...

Audio Note AN-SS Loudspeaker Cable Y-Spade, Heavy Silver-Plated, Non-Magnetic, (CON-065B) Our Spade connectors are press formed from non-magnetic metal then heavily plated in high purity Silver to the same standard as our RCA connectors, binding posts...

BTS Banana to Spade Adaptor - Using the 6mm CGMS Spades This banana to spade adapter features a rhodium-plated pure copper body to give hi-fi DIYers a premium connection. For those times when you need to adapt your speaker cables from banana to spade,...

Cardas Audio Adapter BTS 9mm (CGMS 9RXS) Allows a banana terminated cable to be connected to a binding post using this 9mm/.35” spade. Our BTS 9 is the same spade as our CGMS-9R-XS which has a 4mm termination hole. Has a slight angle of 13* for...

CCMS-C XL Bare Copper Spade (w/0.25†Termination Hole) CCMS-C XL Spade Connectors are built from a single piece of billet copper to give audiophiles musical warmth and high conductivity. Its extra length provides strain relief for difficult...

CCS 8awg Crimping Spades, Copper with Rhodium/Silver Plating. Stepped opening to fit 1/4" and 9mm Binding Posts, 0.138" (3.5mm) I.D These stamped copper crimping spades are plated in rhodium-over-silver to give audiophiles the most musical of...

Cardas Audio Connector CGMS 9R L (Rhodium/Copper) Spade Heavy duty spade milled from high purity billet copper. Fits 0.35”/9mm binding posts. Drilled solder hole to aid in termination. Has a slight angle of 13° for increased cable clearance. Maximum...

CLJP C Copper Jumper (fits 6mm) Note: Discontinued Qty Avail: 10 Cardas Audio CLJP Copper Jumpers allow you to run single-ended speaker cables to your bi-wirable speakers. It’s one-piece bare copper construction is both durable and economic, allowing...

GRS U Gold Rhodium-Plated over Copper Spade Lug The Cardas Audio GRS is stamped from copper and plated in rhodium to give audiophiles a pure connection with alluring musical warmth. Features• Stamped from copper• Rhodium-plated• Comes...

O Ring Spade, 12awg, Gold-Plated Copper, 12-10awg, Large

Fork Spade, 14awg, Gold-Plated Copper, 16-14awg

ConneX Connector Carbon Fiber, Rhodium-plated Spade Connector

G-Fork Spade, Right-Angled, Gold-Plated Brass

ConneX Connector Gold-Plated, Copper “Stepped” Spade LugsSpecifications:Conductor material: Pure CopperPlating process: 5 micronsInstall cable diameter: Max 4.2mmSpade inner size: Top 8.2mm - Bottom 6.2mmSpade outer size: 13.5mm

ConneX Connector Rhodium-plated, Copper “Stepped” Spade Lugs

BSP Mini-Spade (for the Screw Terminals on Vintage Amplifiers and Speakers) fits 10-14awg Overall width: 8mmFeatures• Mini-spade for the screw terminals on vintage amps & speakers• Fits 10-14 gauge wire• Overall width: 8.0 mm